Model No.: HDES100-P
The Extender uses single cat5e or cat6(recommended) cables instead of HDMI cable to transmit high definition signal up to 100 meters, cutting down the cost. The Extender is designed to supply for long distance transmission of high definition signal.
Features
1: Support HDMI 1.4b.
2: Support local loop-out .
3: Support 100m long distance transmission
4: Low power consumption, low temperature and high safety.
5: Support 3D video format
6: Both the TX and RX support 3.5MM left and right audio output
7: Support IR control
Specifications:
Length of CAT5e/CAT6 cable between Rx and TX ……………................ Up to 100 meters
HDMI Input …..…………………...……….................... 4k/1080p/720p/576p/576i/480p/480i
HDMI Output …..…………….…........................ 4k/1080p/1080i/720p/576p/576i/480p/480i
Max bandwidth ………………………………………………………………………….. 340MHz
Max baud rate ……………….…….………………….………….…………………... 3x3.4Gbps
Input video signal ………….…………………………………………….…...... 0.5~1.5Volts p-p
Output DDC signal …………………………………………………................. 5Volts p-p (TTL)
Input HDMI cable distance ………….…………............ ≤15m AWG26 HDMI standard cable
Output HDMI cable distance ....................................... ≤15m AWG26 HDMI standard cable
TX Max working current ………………………………………...………….……………. 350mA
RX Max working current …………………………………………...…………………….. 200mA
Power adapter format ………...…... Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1A
Operating Temperature range ……..…………….………………………....…… (-15 to +55℃)
Operating Humidity range ………………………….….…… 5 to 90%RH (No Condensation)
Dimension (L x W x H) ……………………………….…………….……… 81x87.5x23.5 (mm)
TX Weight …..……………………………………………..………………………........…… 210g
RX Weight .................................................................................................................... 200g
Connecting and Operating:
1.Connect one HDMI cable between source device and TX Extender, the max cable distance is 15 meters
2.Connect one HDMI cable between display device and RX Extender, the max cable distance is 15 meters
3.Connect single cat-5e or cat-6(recommended) cables instead of HDMI cables between TX and RX Extender, the max cable distance is 100 meters
4.Connect 5V power supply to the TX and RX.
5.LED indicator light TX LED indicator light: When there is no signal input, it turns blue; When there is signal input, it turns red,and keep flashing. RX LED indicator light: When there is no signal input, it turns blue; When there is signal input, it turns red,and keep flashing.
6.The pairs of IR RX and IR TX cable connect the 3.5mm IR RX and IR TX port of the receiver and transmitter respectively.(Just connect when you need it)